Procedure Details

Details about the selected procedure

Back To Contents Page

Editing This Procedure

You can edit this procedure online to update it for the next person who needs to do it.

O Ring Stock Check

Back To Contents

Details

Procedure Log

This procedure has been completed on the following occasions.
Date Member Supplier Cost Comment

Itemlist

This procedure applies to the following items:

(str01),

Required Items

The following items are referenced in the procedure and will be required to complete it.

This table is populated automatically with the items that are referenced in the text in the instructions.

Item Attributes In Stores?
SPG Swivel O-ring material = Viton
AS568B = 003
 true
BS003 O Ring Size = BS003
hardness = 60
InsideDiameter = 1.78mm
Section = 21.78mm
TypicalUse = Some HP swivels
 true
BS006 O Ring Size = BS006
hardness = 60
InsideDiameter = 2.900
Section = 1.78
TypicalUse = BC power inflate
 true
Reg Swivel O-ring material = Viton
AS568B = 010
 true
LP port O-ring material = Viton
AS568B = 013
 true
HP port O-ring material = Viton
AS568B = 012
MikesPartNo = 01.050.424
 true
BS013 O Ring Size = BS013
hardness = 60
InsideDiameter = 10.82
Section = 1.78
TypicalUse = Large Low-Pressure Port/Hose (1/2 UNF)
 true
A-clamp O-ring material = Vitron
AS568B = 015
MikesPartNo = OR 111 S
 true
BS015 O Ring Size = BS015
hardness = 60
InsideDiameter = 14.00
Section = 1.78
TypicalUse = Cylinder Valve Bonnet Nut
 true
BS110 O Ring Size = BS110
hardness = 90
InsideDiameter = 9.190
Section = 2.62
TypicalUse = MDE Yoke Valves
 true
BS111 O Ring Size = BS111
hardness = 90
InsideDiameter = 10.78
Section = 2.62
TypicalUse = Small DIN Regulator/Valve
 true
BS112 O Ring Size = BS112
hardness = 90
InsideDiameter = 12.37
Section = 2.62
TypicalUse = Standard DIN Regulator/Valve (Nearly all DIN regulators)
 true
BS116 O Ring Size = BS116
hardness = 90
InsideDiameter = 18.72
Section = 2.62
TypicalUse = Cylinder with Small Neck/Valve (7/8 UNF - 'Genesis' 3500 psi Steel cylinders)
 true
BS210 O Ring Size = BS210
hardness = 60
InsideDiameter = 18.64
Section = 3.53
TypicalUse = BC dump valves
 true
BS214 O Ring Size = BS214
hardness = 90
InsideDiameter = 25.00
Section = 3.53
TypicalUse = Cylinder with Large Neck/Valve (3/4 NPS - All Aluminum, most Steel cylinders)
 true
BS023 O Ring Size = BS023
hardness = 60
InsideDiameter = 26.70
Section = 1.78
TypicalUse =
true
BS019 O Ring Size = BS019
hardness = 60
InsideDiameter = 20.35
Section = 1.78
TypicalUse =
true
BS118 O Ring Size = BS118
hardness = 60
InsideDiameter = 21.89
Section = 2.62
TypicalUse =
true
BS005 O Ring Size = BS005
hardness = 60
InsideDiameter = 2.570
Section = 1.78
TypicalUse =
true
ED14x1.5 Washer Size = ED14x1.5
TypicalUse = For the filling whip valves
 true

Instructions

Identify which O rings need ordering

You should try to identify which O Rings need to be ordered for the O ring store. At the time of writing we try to stock the following O Rings: SPG Swivel O-ring, BS003 O Ring, BS006 O Ring, Reg Swivel O-ring, LP port O-ring, HP port O-ring, BS013 O Ring, A-clamp O-ring, BS015 O Ring, BS110 O Ring, BS111 O Ring, BS112 O Ring, BS116 O Ring, BS210 O Ring, BS214 O Ring, BS023 O Ring, BS019 O Ring, BS118 O Ring, BS005 O Ring, ED14x1.5 Washer

Useful Information

You will find the following useful: O-ring site, O-ring list.