Procedure Details

Details about the selected procedure

Back To Contents Page

Editing This Procedure

You can edit this procedure online to update it for the next person who needs to do it.

Edit this procedure

Static Filters Test

Back To Contents

Details

UBUCid=TestF
Category = Visual Inspection
Optionality = mandatory
Because = Legally pressure vessels must be inspected
Estimated Cost =
Frequency in Months = 60
Level = commercial
Estimated time in hrs =

Procedure Log

This procedure has been completed on the following occasions.

Date	Member	Supplier	Cost	Comment
2015-08-10	Tim Walsh	Central Compressors	240.00

Itemlist

This procedure applies to the following items:

(cp001),

Required Items

The following items are referenced in the procedure and will be required to complete it.

This table is populated automatically with the items that are referenced in the text in the instructions.

Item	Attributes	In Stores?

Instructions

inspection

The water separator and air filter on the compressor are pressure vessels and must have a hydro test every 5 years Filter Image.

PartListRef	15-20
TohatsuPartNo	348-64232-0
id	bep18
store	false

PartListRef	15-21
TohatsuPartNo	345-64124-0
id	bep19
store	false

PartListRef	15-22
TohatsuPartNo	345-64121-0
id	bep20
store	false
torque	29-39Nm

PartListRef	15-3
TohatsuPartNo	348-64211-0
id	bep21
store	false

PartListRef	15-19
id	bep22
store	true

MikesNo	APA48
PartNo	AP50/24
colour	black
id	rgp03
length	24inch
store	true

MercuryPartNo	27-853702005
PartListRef	1-14
TohatsuPartNo	346-01032-0
id	bep03
store	true

PartListRef	1-12
TohatsuPartNo	345-01030-0
id	bep04
open	60 degrees C
store	false

MercuryPartNo	853780A1
PartListRef	24-3
TohatsuPartNo	345-87122-0
id	bep07
store	true

MercuryPartNo	8M0082880
PartListRef	14-4
TohatsuPartNo	332-60006-0
id	bep25
store	true
thickness	1.2mm

MercuryPartNo	17-952189
PartListRef	16-19
TohatsuPartNo	951403-0312
id	bep26
length	12mm
store	true
thickness	3mm

MercuryPartNo	853792T01
PartListRef	24-9
TohatsuPartNo	361-87322-0
id	bep29
store	true

MercuryPartNo	27-853702008
PartListRef	5-2
TohatsuPartNo	346-04901-0
id	bep30
store	false

MercuryPartNo	50-8126391
PartListRef	11-1-21
TohatsuPartNo	345-05013-1
id	bep38
length	205cm
store	true
thickness	4mm

PartListRef	8-12-1
TohatsuPartNo	3C7-06921-0
id	bep39
resistance	5 Ohm
store	true
type	LB05EP

APPartNo	AP5
id	bdp01
store	false

APPartNo	AP5A
id	bdp02
store	true

APPartNo	AP18A
id	bdp03
store	true

APPartNo	AP14
id	bdp04
store	true

MercuryPartNo	18-8150264
PartListRef	15-23
TohatsuPartNo	951503-0325
id	bep40
length	34mm
store	true
thickness	2.7mm

InsideDiameter	1.78mm
Section	21.78mm
Size	BS003
TypicalUse	Some HP swivels
hardness	60
id	or002
store	true

InsideDiameter	2.900
Section	1.78
Size	BS006
TypicalUse	BC power inflate
hardness	60
id	or003
store	true

InsideDiameter	6.070
Section	1.78
Size	BS010
TypicalUse	Low-Pressure Hose/2nd Stage, Regulator Cylinder Valve Stem
hardness	60
id	rgp13
store	true

InsideDiameter	7.660
Section	1.78
Size	BS011
TypicalUse	Standard Low-Pressure Port/Hose (3/8 UNF)
hardness	60
id	rgp11
store	true

InsideDiameter	9.250
Section	1.78
Size	BS012
TypicalUse	High-Pressure Port/Hose (7/16 UNF), Manifold and Manifold Port Plugs
hardness	90
id	rgp12
store	true

InsideDiameter	10.82
Section	1.78
Size	BS013
TypicalUse	Large Low-Pressure Port/Hose (1/2 UNF)
hardness	60
id	or007
store	true

InsideDiameter	12.42
Section	1.78
Size	BS014
TypicalUse	Standard Yoke Regulator/K-valve
hardness	90
id	cpp23
store	true

InsideDiameter	14.00
Section	1.78
Size	BS015
TypicalUse	Cylinder Valve Bonnet Nut
hardness	60
id	or009
store	true

InsideDiameter	9.190
Section	2.62
Size	BS110
TypicalUse	MDE Yoke Valves
hardness	90
id	or010
store	true

InsideDiameter	10.78
Section	2.62
Size	BS111
TypicalUse	Small DIN Regulator/Valve
hardness	90
id	or011
store	true

InsideDiameter	12.37
Section	2.62
Size	BS112
TypicalUse	Standard DIN Regulator/Valve (Nearly all DIN regulators)
hardness	90
id	or012
store	true

InsideDiameter	18.72
Section	2.62
Size	BS116
TypicalUse	Cylinder with Small Neck/Valve (7/8 UNF - 'Genesis' 3500 psi Steel cylinders)
hardness	90
id	or013
store	true

InsideDiameter	18.64
Section	3.53
Size	BS210
TypicalUse	BC dump valves
hardness	60
id	or014
store	true

InsideDiameter	25.00
Section	3.53
Size	BS214
TypicalUse	Cylinder with Large Neck/Valve (3/4 NPS - All Aluminum, most Steel cylinders)
hardness	90
id	or015
store	true

InsideDiameter	26.70
Section	1.78
Size	BS023
TypicalUse
hardness	60
id	or016
store	true

InsideDiameter	20.35
Section	1.78
Size	BS019
TypicalUse
hardness	60
id	or017
store	true

InsideDiameter	21.89
Section	2.62
Size	BS118
TypicalUse
hardness	60
id	or018
store	true

InsideDiameter	2.570
Section	1.78
Size	BS005
TypicalUse
hardness	60
id	or019
store	true

Size	ED14x1.5
TypicalUse	For the filling whip valves
id	or020
store	true