UBUC Maintenance Documentation

This club exists to provide for its members facilities, opportunity and training for underwater exploration, science, and sport.

Back To Contents

O2 Decanting Hose is currently working

Edit this item

Other Attributes

Part Attributes Applicable Procedures
Main
  • model = DPM300 mk 4
  • newvalue = 453.90
  • status = working
Record
Complete		 Difficulty Procedure Last Compleated Interval (Months) Estimated Cost
Decant Oxygen
Gas Mixing Course
Insp Decant Hose 6
Non-diving oxygen cylinder testing 60

References

Logs

Add new log entry

Date Member Supplier Cost Comment Type Comment
2018-05-14 Sam Walder Sub Aqua Products 179.40 Condition: working Bought some new bits from Sub-aqua products to make it a bit better. Still recommend recording the age of the hose here and replacing it every few years to keep things safe.
2018-05-08 Sam Walder 170.00 Condition: niggle Lots of things are not quite right with this whip. It needs a new valve as the one on it is not a needle valve! The purge system is awful as it requires you to purge the whole hose. Also needs to have a one way valve fitted. Recommend recording the age of the hose here and replacing it every few years to keep things safe. Part number from sub aqua products are needle valve = 6000 0X and one way valve = 5100
2017-11-30 Sam Walder Condition: working Whip has been O2 cleaned by Jon Massy for us :-)
2013-03-04 Tim Walsh 453.90 Condition: quote Current replacement price=£453.90